How to Set up a Cleaved Storm Window

DIY or NOT?

Fourth dimension

A few hours

Complexity

Beginner

Cost

$twenty-fifty

Introduction

A broken tempest window tin be dangerous and inefficient, but is it a DIY projection? A few things to know before you make up one's mind to exercise it yourself.

Tools Required

Materials Required

  • Window drinking glass
  • Wood block

Projection step-by-stride (ix)

Step 1

[embed_section]

Embed Carousel

[embed-content prototype="" title="" buybutton="" linkurl="" siteurl="" productprice="" newtab="" imageid=""/]

[/embed_section]

Aluminum Storm Windows

Some storm windows have screws on all four corners holding the frame together. These windows yous can fix yourself if the gasket is available or reusable. Most common tempest window frames are machine pressed together and need to be drilled out to separate the frame. Yous will need special pins to re-assemble the frame (not found in stores). See Photograph.

In other storm windows, the drinking glass is held in the frame with a friction fit gasket called Glazing Spline (not found in stores). This frame does not need to exist disassembled. These windows you tin can prepare yourself if the gasket is bachelor or reusable.

There are storm window frames that are easily disassembled and held together with friction-fit corner fasteners and a rubber gasket that wraps around the glass. These windows you lot can fix yourself if the gasket is available or reusable.

Step ii

Remove Broken Glass

  • If the glass is shattered in several places, remove it slice by piece and discard it properly, and so vacuum the frame and window area thoroughly.
  • If the glass is but cracked, carefully remove the storm window.

Ever wear gloves and safety spectacles.

Step 3

Remove the Window Frame

  • To remove the window frame; press in on the two bottom latches and push button the window upwardly, continue pressing the latches and pull the bottom window toward you lot and out of the rails. Then tilt the window to ane side, sliding the pinnacle pins out of the runway.
  • Fix the window on a make clean apartment surface.

Step 4

Measure out for New Glass

  • Before disassembling the frame, mensurate the inside width and superlative of the frame.
  • If some of the glass has been removed, measure the depth of the aqueduct that the glass sits in, using a flat ruler. Multiply that number past two and add it to your width and height measurements to get your drinking glass size. Yous may have to do this after the frame is disassembled.

Footstep five

Disassemble the Frame

  • Secure one of the side frames to your piece of work surface with a clamp.
  • Identify a wood cake on the inside corner of the frame and tap it with a hammer separating the frames. Repeat this on all four corners.
  • Remove the rest of the glass and prophylactic gasket from the frame, being careful not to tear the gasket.
  • Discard the drinking glass and vacuum the frame and work area earlier moving on.

Step 6

Inspect the Gasket

  • Inspect the gasket for tears and cracks. Almost gaskets cannot be plant at your local hardware store but ordered online from window hardware supply.

Step 7

Install the Glass

  • Employ the gasket over the border of the glass. If it'south a new gasket, make small cuts at the corners.
  • Install the side frames starting time past inserting the drinking glass and gasket into the aqueduct of the frame, gently tap it with a rubber mallet.
  • Aline the corner keys on the superlative frame with the corners of the sides, and gently tap the frame onto the glass. Do the same with the bottom frame.

Footstep 8

Re-install the Window

  • Clean the glass with window cleaner before installing it.
  • Tilt the top of the window frame to one side and insert the height pins into the track.
  • Straighten the window and press in the latches to set the window into the frame, then release the latches.

Step ix

Storm Window Wrap Up

  • Well-nigh storm window hardware and gaskets are not available at your local hardware and edifice supply stores.
  • When you consider the cost of glass and hardware, plus the time spent trying to find the proper hardware to fit your window frame, this may non be worth doing yourself. Your local hardware shop typically offers storm window and screen repair.
  • Here are a few online window hardware suppliers: Reflect Window & Door, DK Hardware, Alco Window & Door Supply.

Originally Published: November 09, 2022